EVduty-50 (40A) electric vehicle charging station, hardwired
ZZ-EL-EVC40-25XX-00012
Regular price $799.00Technical specifications:
- Input cable : #8AWG/2C + #10AWG/1C, length 0.9m (3') with wiring leads, no plug
- 208-240VAC / 40 amps / 9,6 kW
- For indoor or outdoor installation (-40 ° C to 40 ° C)
- Output cable: 7,6 meters (25 feet)
- Limited warranty: 5 years (3 yrs for the cable/connector)
- Compatible with all plug-in vehicles (100% electric or plug-in hybrids) sold in North America
- Conformity to applicable CSA and UL standards CERTIFIED by LabTest Certification Inc., for ALL variants.
Free with your purchase:
- J1772 plug holster
- Wall mount with cable support
Shipping price
- Canada ~25$
- Installation costs are usually lower;
- 6 ft power cable which allows for a more discreet and esthetic installation with the junction box installed in a less noticeable location;
- CSA and UL compliance certified by LABTEST Certification Inc.
Conformity to these standards certified by LabTest Certification Inc.
- CSA-C22.2 No. 218.1 (2012)/ UL2231-2 (Edition 2) (2012) - Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits
- CSA-C22.2 No. 218.2 (2012)/ UL2231-2 (Edition 2) (2012) – Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems
- UL 2594 (Edition 1)/ CSA-C22.2 No. 280:13 – Standard for Electric Vehicle Supply Equipment
If you order an EVC30 standard charging station, an upgrade to a Smart-Home or Smart-Pro version is available if you need it later. For an EVC30 changing station bearing a serial number of 4700 or higher, you will order the «Programming» update which will be done over the air by Elmec inc. For an EVC30 charging station bearing a serial number of 0001 to 4699, you will order the «Module» update to receive a new electronic circuit and installation instructions. Shop upgrades >
Your EVduty charging station must be installed on a 40 amp circuit by a master electrician. See DOCUMENTS page to download the user manual and hand it to your electrician.
It is imperative to insist that the electrician in charge of the installation DOES NOT MODIFY the charging station and installs the wall socket or junction box in accordance with existing standards. The installer must not, under any circumstances cut, modify or replace the power cable of the charging station to make it into a different version. The type of electrical connection (type of power cable) must not be modified in any way as certification and warranty would then no longer be valid.
You may be eligible for a rebate on the purchase and installation of your charging station. See INCENTIVE REBATE page for more information >
See DOCUMENTS page to download user manual and data sheet.
